Signalpoint Flammable and Toxic Gas Detector
Explosion-Proof Transmitters

The Signalpoint range of flammable, toxic and Oxygen gas detectors offers a low cost solution to indoor gas monitoring.
Features & Benefits
Flammable, toxic and Oxygen versions available
ATEX hazardous area approval
Wall or ceiling mounting
Quick Specs
Sensor: Polyphenylene Sulphide (PPS). Integral Junction Box: Impact resistant Nylon.

IP54 in accordance with EN60529:1992

Product Overview

Supplied with an integral pre-wired junction box, the detector can be installed using conduit or cable and glands depending on individual site standards.
Two basic arrangements are provided. Flammable detectors offer mV bridge output for use with dedicated gas control systems (such as Unipoint) and are certified under ATEX for use in potentially explosive atmospheres. Toxic and Oxygen detectors are designed for use in non-explosive atmospheres.
They are 2 wire 4-20mA loop powered and can be used with PLC or dedicated gas control systems.
Toxic and Oxygen versions of Signalpoint also provide a local LED indication of their status; periodic green flash (OK), flashing amber (warning) and flashing red (alarm). Seconds count and so the front-end sensor design ensures fast speed of response even with ‘sticky’ gases. 
Easy installation is provided for. The junction box includes ‘hidden’ mounting for 
wall and ceiling fixings. The hinged lid of the junction box ensures both hands 
are free to complete electrical connections via the M20 clearance cable/conduit entry.
Maintenance requirements are kept simple and to a minimum. Normally used with the Honeywell Analytics range of industrial controllers, all user adjustments are made at the controller as required. At the end of their operating life, simply replace the sensor before re-configuring the controller. Sensor exchange kits are available to replace the electrochemical sensors used in the toxic and Oxygen detectors. The flammable sensor is simply replaced by fitting a new lid complete with sensing element. 
Signalpoint offers low cost, easy installation and simple maintenance. As part of any Honeywell Analytics gas detection system you are assured of being surrounded by gas detection equipment you can trust to keep you safe.
Additional Features and Benefits:
One-Stop Shop
•  Flammable, toxic and Oxygen versions available
•  IP54 as standard
•  Suitable for indoor use
 
Proven Sensor Technology
•  Surecell™ electrochemical sensors
•  Poison resistant catalytic bead
•  Fast and reliable
 
Combustible Version
•  ATEX hazardous area approval
•  Performance to EN50054
•  Typical 5 year operational life
 
Toxic and Oxygen Versions
•  Indoor non hazardous area use
•  Local LED indication of status (operation, A1 and A2)
•  Performance to EN45544*
•  Typical 2 year operational life * H2S version only
 
Easy to Use
•  Factory set operation
•  Simple to replace sensors
•  Minimal training required
 
Friendly Installation
•  Wall or ceiling mounting
•  Integral junction box
•  Pre-drilled M20 clearance cable entry
 
Range of Accessories
•  Weather Housing
•  Flow adaptor
•  Duct mounting kit
•  Collecting cone
* Oxygen detection products must only be used to detect Oxygen depletion in air.

Порядок заказа оборудования
Детекторы 2106B1100 Детектор обнаружения горючих газов Signalpoint (100% LEL)
2106B1300 Детектор обнаружения токсичных газов Signalpoint H2S (20 промилле)
2106B1301 Детектор обнаружения токсичных газов Signalpoint H2S (50 промилле)
2106B1302 Детектор обнаружения токсичных газов Signalpoint H2S (100 промилле)
2106B1305 Детектор обнаружения токсичных газов Signalpoint CO (100 промилле)
2106B1306 Детектор обнаружения токсичных газов Signalpoint CO (200 промилле)
2106B1307 Детектор обнаружения токсичных газов Signalpoint CO (500 промилле)
2106B1310 Детектор обнаружения токсичных газов Signalpoint Cl2 (5 промилле)
2106B1311 Детектор обнаружения токсичных газов Signalpoint Cl2 (15 промилле)
2106B1313 Детектор обнаружения токсичных газов Signalpoint NH3 (50 промилле)
2106B1314 Детектор обнаружения токсичных газов Signalpoint NH3 (1000 промилле)
2106B1316 Детектор обнаружения токсичных газов Signalpoint O2 (концентрация 25% в объемном отношении)
Стандартный комплект В комплект поставки каждого детектора входит цельная распределительная коробка, один вход M20 безрезьбового типа, откидная
поставки крышка и инструкция в пластиковом пакете.
Дополнительные 02000-A-1645 Потоковый колпак для калибровочного газа (для горючих и токсичных газов)
принадлежности 02000-A-3120 Потоковый колпак для калибровочного газа (для токсичных абсорбирующих газов)
02000-A-1635 Погодоустойчивый наконечник с удаленными газовыми соплами для использования с детекторами обнаружения токсичных
газов и кислорода
02000-A-1640 Погодоустойчивый наконечник с удаленными газовыми соплами для использования с детекторами обнаружения горючих газов
02000-A-1642 Коллекторный конус (горючие газы легче воздуха)
02000-A-3120 Потоковый колпак в сборе
2106B1110 Делитель тока для выхода 4–20 мА измерительного моста каталитического датчика
00780-F-0018 Фильтр датчика детектора обнаружения горючих газов
00910-A-0404 Водоотталкивающий барьер для использования в детекторах обнаружения токсичных газов
2106D2097 Калибровочная крышка для использования в датчиках детекторов обнаружения токсичных газов
Калибровочное Обратитесь к представителю Honeywell Analytics
оборудование

1.Signalpoint Toxic
2106B1316	Signalpoint O2 25% V/V Toxic Sensor
2106B1300	Signalpoint H2S 0-20 ppm Toxic Sensor
2106B1301	Signalpoint H2S 0-50 ppm Toxic Sensor
2106B1302	Signalpoint H2S 100 ppm Toxic Sensor
2106B1305	Signalpoint CO 0-100 ppm Toxic Sensor
2106B1306	Signalpoint CO 0-200 ppm Toxic Sensor
2106B1307	Signalpoint CO 0-500 ppm Toxic Sensor
2106B1310	Signalpoint Cl2 0-5 ppm Toxic Sensor
2106B1311	Signalpoint Cl2 0-15 ppm Toxic Sensor
2106B1313	Signalpoint NH3 0-50 ppm Toxic Sensor
2106B1314	Signalpoint NH3 0-1000 ppm Toxic Sensor

2. ACCESSORIES
2106B1110	Catalytic Bridge To 4-20mA Converter
2106B2114	Toxic Calibration Kit
2106D2055	M36/M40 thread adaptor
02000-A-1635	Weatherproof cap including remote gassing nozzle for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000)
02000-A-1640	Weatherproof cap for use with combustible detector including remote gassing nozzle (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000)
02000-A-1642	Collecting cone for use with flammable detector (for Sensepoint, Signalpoint, Satellite (with adapter), XNX MPD and Series 2000)
3. SPARES
2106B1130	0-100% LEL Flam. Replacement Lid
2106B1545	O2 Electrochemical Cell Exch Kit
2106B1549	H2S Electrochemical Cell Exch Kit
2106B1548	CO Electrochemical Cell Exch Kit
2106B1547	Cl2 Electrochemical Cell Exch Kit
2106B1595	NH3 0-1000 ppm Electrochemical Cell Exch Kit
2106B1596	NH3 0-50 ppm Electrochemical Cell Exch kit